Bloodstone Research's October aluminium analysis asked whether falling prices reflected fund selling or fundamentals, at a time when LME stocks, Chinese inventories and available non-Russian metal were all shrinking. Five weeks on, the answer is that both are true at different points on the curve. Aluminium for immediate delivery in London traded at about $275 a tonne over three-month metal on 16 November, a premium not seen since the squeezes of 1988 and 1990, while the three-month price fell to a one-year low two days later. The market is short of readily accessible metal for prompt delivery and expects more metal than it needs later.
TL;DR
- The squeeze: The LME cash-to-three-month spread moved from contango in mid-October to a backwardation of $176.80/t on 12 November, the steepest since November 1990, and about $275/t on 16 November. Official prices on 19 November still showed a $261/t backwardation after the November prompt.
- The price: Three-month aluminium fell 3.8% on 18 November to $2,822.50/t, its lowest since November 2025 and 8% below its level a week earlier, as rate-rise expectations firmed and the market priced in more supply.
- The curve: On 19 November official prices, cash was bid at $3,104/t and December 2027 at $2,783/t. A Reuters survey expects a 2026 deficit to turn into a 2027 surplus.
- The stocks: LME inventories have fallen from 509,250 tonnes at the start of the year to 224,425 tonnes on 19 November. At the end of October, all but 50 tonnes of on-warrant metal was Russian, and Russian metal is now being cancelled for withdrawal.
- The missing supply: Indonesia's PT Hua Chin applied in May to list its HCAI brand, from a plant with 480,000 tonnes of annual capacity. Its output cannot enter LME warrant stocks until that brand is approved, and the application was last reported as pending on 16 November.
- China: Ingot social inventory fell 43,000 tonnes in a week to 446,000 tonnes, about 190,000 tonnes below mid-October, while weekly primary output held at 877,000 tonnes and alumina stocks rose.
The Spread and the Price Moved in Opposite Directions
The LME cash-to-three-month spread was in contango as recently as mid-October and moved into backwardation on 14 October, according to Shanghai Metals Market. By 12 November it had reached $176.80/t, which Reuters described as the steepest since November 1990. On Monday 16 November cash metal traded at about $275/t over three-month, a level Reuters columnist Andy Home compared with the "double-tap" squeezes of 1988 and 1990.
The November prompt date of 18 November did not end it. On official prices, the cash-to-three-month backwardation stood at $230/t that day and widened again to $261/t on 19 November, when cash was bid at $3,104/t against $2,843/t for three months. The squeeze therefore persisted after the prompt. Reuters' observation of about $275/t on 16 November was a separate trading measure. Three-month metal closed 3.8% lower at $2,822.50/t on 18 November, its lowest since November 2025 and 8% lower than on 11 November.
The outright price moved the other way. Three-month aluminium closed at $2,869.50/t on 19 November, against a high of $3,707.50/t in June. SMM attributed the latest fall to firmer expectations of a US rate rise after inflation data and comments from Federal Reserve officials, and to an expected surplus from new capacity outside China and restarts in the Middle East. Home argues that the market has largely priced out the Gulf disruption that followed the outbreak of war with Iran at the end of February.
What the Curve Is Saying
The LME's prices on 19 November describe two markets in one curve. On the exchange's closing prices, the December 2026 contract stood at $3,006.93/t, January 2027 at $2,923.93/t, February at $2,876.75/t and May at $2,829.69/t. On the separate official prices, cash was bid at $3,104/t, December 2027 at $2,783/t, December 2028 at $2,785/t and December 2029 at $2,803/t, so cash stood $321/t above December 2027 on an official bid basis.
Read from the front, the curve falls steeply over a year and then flattens. The front reflects the cost of obtaining deliverable metal now. The decline through 2027 is consistent with expectations of easing supply as Gulf smelters return, Indonesian capacity grows and Chinese output stays at record levels. A Reuters analyst survey published on 10 November expects the global market to move from a 720,000-tonne deficit in 2026 to a 410,000-tonne surplus in 2027. The curve is consistent with that view but does not establish it, since forward prices also reflect financing costs and risk premiums. What the curve does show is that scarcity is far sharper in the nearby months than further out.
Why London Is Short of Deliverable Metal
LME aluminium stocks stood at 509,250 tonnes on 2 January. By 19 November they had fallen 56% to 224,425 tonnes, with 205,975 tonnes on live warrant and 18,450 tonnes cancelled for withdrawal, after total stocks fell 1,725 tonnes on the day. Home calculated on 16 November that registered inventory had fallen by 239,400 tonnes since the war began.
The composition matters more than the total. At the end of October, 216,950 tonnes were on warrant, and all but 50 tonnes of it was Russian-brand metal produced before the April 2024 sanctions, according to Reuters. Wood Mackenzie's Uday Patel told Reuters that "the LME aluminium price is effectively the price of the Russian metal now".
Access to that metal in Europe is also narrowing. Since 26 February the LME has allowed Russian aluminium to be warranted in EU warehouses only with attestation of sanctions compliance, under contracts signed before 25 February 2025 and within a 50,000-tonne quota. From 31 December 2026, it can be warranted only if importers show it entered the EU before that date, with unwarranted metal imported earlier assessed case by case. The LME said in February that no Russian-origin aluminium had been warranted in its EU locations during the preceding transition period, so these rules constrain future warranting in Europe rather than removing existing warrants.
That Russian base is no longer static. Home reported that 17,175 tonnes had been cancelled for load-out in November by 16 November, and that the pace was accelerating. Off-warrant stocks held in LME-approved warehouses fell to 51,631 tonnes, the lowest since the exchange began publishing the figure in 2023, although Rotterdam's off-warrant holdings rose from 10,501 to 33,037 tonnes in mid-November. Reuters reported on 12 November that one entity held between 30% and 39% of LME aluminium warrants. Concentrated holdings in a small stock pool add to the sense of tightness, although the exchange data do not show the holder's intentions.
Why the Coming Surplus Cannot Yet Help
The expected recovery in global supply rests on China, Indonesia and the Gulf, but none offers assured, sufficiently large volumes of immediately deliverable LME metal.
The first is China. Chinese primary output reached 3.85 million tonnes in October, up 1.8% from a year earlier, and Reuters reports that the country is on track for a record of more than 46 million tonnes this year. The 45-million-tonne figure is a ceiling on smelting capacity rather than on annual output, and higher output has come partly from efficiency gains at existing plants. China's exports, however, are largely semi-finished products, which cannot be delivered against the LME's primary aluminium contract. China exported only about 32,000 tonnes of primary aluminium in October, according to SMM's reading of customs data, and remained a net importer.
The second is Indonesia. PT Hua Chin Aluminum Indonesia applied on 7 May 2026 to list its HCAI brand, from a plant with annual capacity of 480,000 tonnes. That is production capacity, not metal waiting to be delivered. It would be only the second Indonesian brand accepted by the LME, after that of state-owned Inalum. Home reported on 16 November that the application was still pending. Until the HCAI brand is listed its metal cannot be placed on LME warrant, and approval would not by itself guarantee prompt warranting. In Home's words, "until Hua Chin gets the green light, any surplus will remain undeliverable."
The third is the Gulf, where smelters disrupted earlier in the year are restarting. Restarted metal will add to physical supply, but whether and when it reaches LME warehouses depends on commercial choices, sanctions constraints and logistics, and the reports reviewed give no reliable current restart volumes.
The squeeze therefore reflects a mismatch in form, origin and location as much as in quantity: metal exists, and more is coming, but little of it is readily available to settle an LME contract today.
Physical Premiums Show the Squeeze Leaking Into Europe
Fastmarkets assessed the Rotterdam duty-paid P1020A premium at $470 to $500/t on 13 November, down 12.6% from $540 to $570/t three days earlier, with the duty-unpaid premium at $390 to $420/t. Fastmarkets reported that stockholders accelerated sales because a backwardation of that size makes holding metal expensive, and some market participants attributed the squeeze to dominant warrant holders.
That is how a backwardation is supposed to resolve itself, by rewarding anyone who can release metal now. The rise in Rotterdam's off-warrant stocks may be preparation for warranting, but that has not been confirmed. Whether those tonnes are placed on warrant will help determine how quickly the London spread narrows.
